You should carefully consider the risks described below. These risks are not the only risks that we may face. Additional risks and uncertainties that we are unaware of, or that we currently deem immaterial, also may become important factors that affect us. If any of the following risks occur, our business, financial condition or results of operations could be materially and adversely affected which could cause our actual operating results to differ materially from those indicated or suggested by forward-looking statements made in this Annual Report on Form 10-K or presented elsewhere by management from time to time.

Risks Related to our Business and Industry

We generate a large portion of our sales from a small number of customers. If we were to lose one or more of our large customers, operating results could suffer dramatically.

The semiconductor manufacturing industry is highly concentrated, with a relatively small number of large semiconductor manufacturers and contract test and assembly companies accounting for a substantial portion of the purchases of semiconductor equipment. Sales to our five largest customers accounted for approximately 93%, 97%, and 98%, of our net sales in fiscal 2024, 2023, and 2022, respectively. During fiscal 2024, two customers accounted for approximately 67% and 17% of the Company’s net sales. During fiscal 2023, two customers accounted for approximately 79% and 10% of our net sales. During fiscal 2023, two customers accounted for approximately 79% and 10% of our net sales. During fiscal 2022, one customer accounted for approximately 82% of our net sales. No other customers accounted for more than 10% of our net sales for any of these periods.

We expect that sales of our products to a limited number of customers will continue to account for a high percentage of our net sales for the foreseeable future. In addition, sales to particular customers may fluctuate significantly from quarter to quarter. The concentration of our customer base increases risks related to the financial condition of our customers, and the deterioration in financial condition of a single customer or the failure of a single customer to perform its obligations could have a material adverse effect on our results of operations and cash flow. If any such customers change their business requirements or focus, vendor selection, project prioritization, or purchasing behavior, or are parties to consolidation transactions, they may delay, suspend, reduce or cancel their purchases of our products or services and our business, financial condition, and results of operations may be adversely affected.

A substantial portion of our net sales is generated by relatively small volume, high value transactions.

We derive a substantial portion of our net sales from the sale of a relatively small number of systems with high dollar value. As a result, the loss or deferral of a limited number of system sales could have a material adverse effect on our net sales and operating results in a particular period. Most customer purchase orders are subject to cancellation or rescheduling by the customer with limited penalties, and, therefore, backlog at any particular date is not necessarily indicative of actual sales for any succeeding period. From time to time, cancellations and rescheduling of customer orders have occurred, and delays by our suppliers in providing components or subassemblies to us have caused delays in our shipments of our own products. From time to time, cancellations and rescheduling of customer orders have occurred, and delays by our suppliers in providing components or subassemblies to us have caused delays in our shipments of our own products. For example, in the second and third quarters of 2024, we experienced significant delays in expected customer orders and an increased frequency of customers rescheduling. There can be no assurance that we will not be materially adversely affected by future cancellations or rescheduling by our customers or other delays in our shipments. For non-standard products where we have not effectively demonstrated the ability to meet specifications in the customer environment, we defer revenue until we have met such customer specifications. Any delay in meeting customer specifications could have a material adverse effect on our operating results. A substantial portion of net sales typically are realized near the end of each quarter. A delay or reduction in shipments near the end of a particular quarter, due, for example, to unanticipated shipment rescheduling, cancellations or deferrals by customers, customer credit issues, unexpected manufacturing difficulties experienced by us or delays in deliveries by suppliers, could cause net sales in a particular quarter to fall significantly.

The semiconductor equipment industry is intensely competitive. In each of the markets we serve, we face competition from established competitors and potential new entrants, many of which have greater financial, engineering, manufacturing and marketing resources than us.

Our FOX wafer-level and singulated die/module test and burn in systems face competition from larger systems manufacturers that have significant technological know-how and manufacturing capability. Some users of our systems, such as independent test labs, build their own burn-in systems, while others, particularly large IC manufacturers in Asia, acquire burn-in systems from captive or affiliated suppliers. Our WaferPak products are facing and are expected to face increasing competition. Several companies have developed or are developing full-wafer and single-touchdown probe cards. The Company expects that its DiePak products for burning-in and testing multiple singulated die and small modules face significant competition. The Company believes that several companies have developed or are developing products which are intended to enable test and burn-in of multiple bare die, and small modules.

We expect our competitors to continue to improve the performance of their current products and to introduce new products with improved price and performance characteristics. New product introductions by our competitors or by new market entrants could cause a decline in sales or loss of market acceptance of our products. We have observed price competition in the systems market, particularly with respect to its less advanced products. Increased competitive pressure could also lead to intensified price-based competition, resulting in lower prices which could adversely affect our operating margins and results. We believe that to remain competitive we must invest significant financial resources in new product development and expand our customer service and support worldwide. There can be no assurance that we will be able to compete successfully in the future.

We rely on increasing market acceptance for our FOX system, and we may not be successful in attracting new customers or maintaining our existing customers.

A principal element of our business strategy is to increase our presence in the test equipment market through system sales in our FOX wafer-level and singulated die/module test and burn-in product family. Market acceptance of the FOX system is subject to a number of risks. Before a customer incorporates the FOX system into a production line, lengthy qualification and correlation tests must be performed. Before a customer will incorporate the FOX system into a production line, lengthy qualification and correlation tests must be performed. We anticipate that potential customers may be reluctant to change their procedures in order to transfer burn-in and test functions to the FOX system. Initial purchases are expected to be limited to systems used for these qualifications and for engineering studies. Market acceptance of the FOX system also may be affected by a reluctance of IC manufacturers to rely on relatively small suppliers such as us. As is common with new complex products incorporating leading-edge technologies, we may encounter reliability, design and manufacturing issues as we begin volume production and initial installations of FOX systems at customer sites. The failure of the FOX system to achieve increased market acceptance would have a material adverse effect on our future operating results, long-term prospects and our stock price.

We may experience increased costs associated with new product introductions.

As is common with new complex products incorporating leading-edge technologies, we have encountered reliability, design and manufacturing issues as we begin volume production and initial installations of certain products at customer sites. Some of these issues in the past have been related to components and subsystems supplied to us by third parties who have in some cases limited the ability of us to address such issues promptly. This process in the past required and in the future is likely to require us to incur un-reimbursed engineering expenses and to experience larger than anticipated warranty claims which could result in product returns. In the early stages of product development there can be no assurance that we will discover any reliability, design and manufacturing issues or, that if such issues arise, that they can be resolved to the customers’ satisfaction or that the resolution of such problems will not cause us to incur significant development costs or warranty expenses or to lose significant sales opportunities.

Our industry is subject to rapid technological change and our ability to remain competitive depends on our ability to introduce new products in a timely manner.

The semiconductor equipment industry is subject to rapid technological change and new product introductions and enhancements. Our ability to remain competitive depends in part upon our ability to develop new products and to introduce them at competitive prices and on a timely and cost-effective basis. Our success in developing new and enhanced products depends upon a variety of factors, including product selection, timely and efficient completion of product design, timely and efficient implementation of manufacturing and assembly processes, product performance in the field and effective sales and marketing. Because new product development commitments must be made well in advance of sales, new product decisions must anticipate both future demand and the technology that will be available to satisfy that demand. Furthermore, introductions of new and complex products typically involve a period in which design, engineering and reliability issues are identified and addressed by our suppliers and by us. There can be no assurance that we will be successful in selecting, developing, manufacturing and marketing new products that satisfy market demand. Any such failure would materially and adversely affect our business, financial condition and results of operations.

Because of the complexity of our products, significant delays can occur between a product’s introduction and the commencement of the volume production of such product. We have experienced, from time to time, significant delays in the introduction of, and technical and manufacturing difficulties with, certain of our products and may experience delays and technical and manufacturing difficulties in future introductions or volume production of our new products. Our inability to complete new product development, or to manufacture and ship products in time to meet customer requirements would materially adversely affect our business, financial condition and results of operations.

We are exposed to cybersecurity threats or incidents.

We collect, maintain, and transmit data on information systems. These systems include those owned and maintained by the Company or by third parties. In addition, we use cloud-based enterprise resource planning, ERP, software to manage the business integrating all facets of operations, including manufacturing, finance, and sales and marketing. The data maintained on these systems includes confidential and proprietary information belonging to us, our customers, suppliers, and others. While the Company devotes significant resources to protect its systems and data from unauthorized access or misuse, we are exposed to cybersecurity risks. Our systems are subject to computer viruses, data breach, phishing schemes, and other malicious software programs or attacks. We have experienced cyber threats and incidents in the past. Although past threats and incidents have not resulted in a material adverse effect, cybersecurity incidents may result in business disruption, loss of data, or unauthorized access to intellectual property which could adversely affect our business.

A decrease in customer device failure rates and future changes in semiconductor technologies may result in a decrease in demand for our products.

Customer tool utilization is driven by many factors including failure rates of customer devices. Improvements in yield may result in customers decreasing test and burn-in times, or electing to perform sampling rather than 100% burn-in of their devices. Based upon data obtained from our systems customers may revise internal manufacturing processes to decrease failure rates. A decrease in customer quality targets or tool utilization may result in a decrease in demand for our products impacting our business and results of operations. A decrease in customer tool utilization may result in a decrease in demand for our products impacting our business and results of operations.

Future improvements in semiconductor design and manufacturing technology may also reduce or eliminate the need for our products. For example, improvements in semiconductor process technology and improvements in conventional test systems, such as reduced cost or increased throughput, may significantly reduce or eliminate the market for one or more of our products. If we are not able to improve our products or develop new products or technologies quickly enough to maintain a competitive position in our markets, it could cause us to lose customers, substantially decrease or delay market acceptance and sales of our products and services, and significantly harm our business, financial condition, and results of operations. If we are not able to improve our products or develop new products or technologies quickly enough to maintain a competitive position in our markets, our business may decline.

If we fail to operate our business in accordance with our business plan, our operating results, business and stock price may be significantly and adversely impacted.

We attempt to operate our business in accordance with a business plan that is established annually, revised as appropriate, and reviewed by management even more frequently. Our business plan is developed based on a number of factors, many of which require estimates and assumptions, such as our expectations of the economic environment, future business levels, our customers’ willingness and ability to place orders, lead-times, and future revenue and cash flow. Our budgeted operating expenses, for example, are based in part on our future revenue expectations. However, our ability to achieve our anticipated revenue levels is a function of numerous factors, including the volatile and historically cyclical nature of our primary industry, customer order cancellations, macroeconomic changes, operational matters regarding particular agreements, our ability to manage customer deliveries, the availability of resources for the installation of our products, delays or accelerations by customers in taking deliveries and the acceptance of our products (for products where customer acceptance is required before we can recognize revenue from such sales), our ability to operate our business and sales processes effectively, and a number of the other risk factors as described in this Item 1A.

Because our expenses are in most cases relatively fixed in the short term, any revenue shortfall below expectations could have an immediate and material adverse effect on our operating results. Similarly, if we fail to manage our expenses effectively or otherwise fail to maintain rigorous cost controls, we could experience greater than anticipated expenses during an operating period, which would also negatively affect our results of operations. If we fail to operate our business consistent with our business plan, our operating results in any period may be materially and adversely impacted. Such an outcome could cause customers, suppliers or investors to view us as less stable, or could cause us to fail to meet financial analysts’ revenue or earnings estimates, any of which could have an adverse impact on our stock price.

In addition, our management is constantly striving to balance the requirements and demands of our customers with the availability of resources, the need to manage our operating model and other factors. In furtherance of those efforts, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries, installations and payment scheduling. Any such decisions may impact our ability to recognize revenue, including the fiscal period during which such revenue may be recognized, with respect to such products, which could have a material adverse effect on our business, results of operations or stock price. Over the past year, the Company has increased inventory levels significantly. This decision was driven by previously experienced long lead time in obtaining critical parts and in producing the systems and by higher projected revenues. As a result, if actual revenues do not meet these projections, the Company may face challenges related to excess inventory, including potential write-downs or obsolescence, which could adversely affect our financial results.

We are exposed to risks related to our commercial terms and conditions, including our indemnification of third parties, as well as the performance of our products.

Although our standard commercial documentation sets forth the terms and conditions that we intend to apply to commercial transactions with our business partners, counterparties to such transactions may not explicitly agree to our terms and conditions. In situations where we engage in business with a third party without an explicit master agreement regarding the applicable terms and conditions, or where the commercial documentation applicable to the transaction is subject to varying interpretations, we may have disputes with those third parties regarding the applicable terms and conditions of our business relationship with them. Such disputes could lead to a deterioration of our commercial relationship with those parties, costly and time-consuming litigation, or additional concessions or obligations being offered by us to resolve such disputes, or could impact our revenue or cost recognition. Any of these outcomes could materially and adversely affect our business, financial condition and results of operations. Any such failure would materially and adversely affect our business, financial condition and results of operations.

In addition, in our commercial agreements, from time to time in the normal course of business, we indemnify third parties with whom we enter into contractual relationships, including customers, suppliers and lessors, with respect to certain matters.

We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, third party claims that our products, when used for their intended purposes, infringe the IP rights of such third parties, or other claims made against certain parties. We may be compelled to enter into or accrue for probable settlements of alleged indemnification obligations, or we may be subject to potential liability arising from our customers’ involvements in legal disputes. In addition, notwithstanding the provisions related to limitations on our liability that we seek to include in our business agreements, the counterparties to such agreements may dispute our interpretation or application of such provisions, and a court of law may not interpret or apply such provisions in our favor, any of which could result in an obligation for us to pay material damages to third parties and engage in costly legal proceedings. It is difficult to determine the maximum potential amount of liability under any indemnification obligations, whether or not asserted, due to our limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in any particular claim. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in defending or settling any purported claims, regardless of their merit or outcomes.

We are also exposed to potential costs associated with unexpected product performance issues. Our products and production processes are extremely complex and, thus, could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs being incurred by us, including increased service or warranty costs, providing product replacements for (or modifications to) defective products, litigation related to defective products, reimbursement for damages caused by our products, product recalls, or product write-offs or disposal costs. These costs could be substantial and could have an adverse impact upon our business, financial condition and operating results. In addition, our reputation with our customers could be damaged as a result of such product defects, which could reduce demand for our products and negatively impact our business.

We may not be able to successfully integrate and manage the acquired business.

Our success depends on our ability to continually enhance and broaden our product offerings in response to customer-anticipated process changes, strategic opportunities for growth, and industry technology trends. We may choose to acquire new and complementary businesses, products, technologies and/or services instead of developing them ourselves. If we are unable to successfully integrate and manage acquired businesses, if the costs associated with integrating the acquired business exceeds our expectations, or if acquired businesses perform poorly, then our business and financial results may suffer. It is possible that the businesses we have acquired may perform worse than expected or prove to be more difficult to integrate and manage than anticipated.

Operational and Other Risks

Supply chain issues, including a shortage of critical components or contract manufacturing capacity, could result in a delay in fulfillment of customer orders, or an increase in costs, resulting in an adverse impact on our business and operating results.

Our sales growth depends on our ability to obtain timely deliveries of parts from our suppliers and contract manufacturers. A market shortage of semiconductor and other component supply could affect lead times, the cost of supply, and our ability to meet customer demand for our products. While we have taken steps to obtain an assurance of supply from our key suppliers, the market shortage of semiconductor supply may impact our ability to meet customer order fulfillments, or result in a significant increase in costs of our inventories. Manufacturing issues or capacity problems experienced by our suppliers or contract manufacturers could impact our ability to secure sufficient supply of critical components. If there is a market shortage of semiconductor supply, suppliers and contract manufacturers may commit their capacity to others, limiting our supplies or increasing costs. Due to the market shortage of semiconductor supply, suppliers and contract manufacturers may commit their capacity to others, limiting our supplies or increasing costs. The failure to obtain timely delivery of supplies, or a significant increase in costs, could result in a material impact in our business and results from operations.

We purchase materials from suppliers worldwide, which subjects the Company to increased risk.

We purchase components, sub-assemblies, and chambers from suppliers outside the United States. Increases in tariffs, additional taxes, or trade barriers may result in an increase in our manufacturing costs. A decrease in the value of the U.S. Dollar relative to foreign currencies would increase the cost of our materials. Should the Company increase its sales prices to recover the increase in costs, this could result in a decrease in the competitiveness of our products. In addition, we are subject to other risks associated with purchasing materials from suppliers worldwide. Government authorities may also implement protectionist policies or impose limitations on the transfer of intellectual property. Government authorities may also implement protectionist policies or impose limitations on the transfer of intellectual property. This may limit our ability to obtain products from certain geographic regions and require us to identify and qualify new suppliers. The process of qualifying suppliers could be lengthy, and no assurance can be given that any additional sources would be available to us on a timely basis. Changes in trade relations, currency fluctuations, or protectionist policies could have a material adverse effect on our business, financial condition or results of operations.

We sell our products and services worldwide, and our business is subject to risks inherent in conducting business activities in geographic regions outside of the United States.

Approximately 95%, 86%, and 90% of our net sales in fiscal 2024, 2023, and 2022, respectively, were attributable to sales to customers for delivery outside of the United States. We provide sales and service globally with resources in North America, Taiwan, Germany, South Korea, and a service organization in the Philippines, as well as direct support through third party agreements in China. We provide sales and service in North America and Taiwan, operate a sales organization in Germany and a service organization in the Philippines, as well as direct support through third party agreements in China and South Korea. We expect that sales of products for delivery outside of the United States will continue to represent a substantial portion of our future sales. Our future performance will depend, in significant part, upon our ability to continue to compete in foreign markets which in turn will depend, in part, upon a continuation of current trade relations between the United States and foreign countries in which semiconductor manufacturers or assemblers have operations. A change toward more protectionist trade legislation in either the United States or such foreign countries, such as a change in the current tariff structures, export compliance or other trade policies, could adversely affect our ability to sell our products in foreign markets. In addition, we are subject to other risks associated with doing business internationally, including longer receivable collection periods and greater difficulty in accounts receivable collection, the burden of complying with a variety of foreign laws, difficulty in staffing and managing global operations, risks of civil disturbance or other events which may limit or disrupt markets, international exchange restrictions, changing political conditions and monetary policies of foreign governments.

Our net sales for fiscal 2024 were primarily denominated in U.S. Dollars. However, because a substantial portion of our net sales is from sales of products for delivery outside the United States, an increase in the value of the U.S. Dollar relative to foreign currencies would increase the cost of our products compared to products sold by local companies in such markets. In addition, since the price is determined at the time a purchase order is accepted, we are exposed to the risks of fluctuations in the U.S. Dollar exchange rate during the lengthy period from the date a purchase order is received until payment is made. This exchange rate risk is partially offset to the extent our foreign operations incur expenses in the local currency. To date, we have not invested in any instruments designed to hedge currency risks. Our operating results could be adversely affected by fluctuations in the value of the U.S. Dollar relative to other currencies.

Global unrest may impact our ability to sell our products or obtain critical materials.

Global economic uncertainty and financial market volatility caused by political instability, changes in international trade relationships and conflicts, such as the conflict between Russia and Ukraine and the political climate in China and Taiwan, the Israel-Hamas war, and escalating tensions in the Red Sea in connection with the attacks to disrupt shipments may result in limited access to these markets for sales and material purchases. Periods of macroeconomic weakness or recession and heightened market volatility caused by adverse geopolitical developments could increase these risks, potentially resulting in adverse impacts on our business operations. Increased energy costs in Europe, resulting from Russia’s limiting energy supplies in the region, may result in an economic downturn or an increase in the cost of materials. The on-going decline in relations between the United States and China, and relations between China and Taiwan, may result in the imposition of trade restrictions with China or Taiwan. The recent decline in relations between the United States and China, and relations between China and Taiwan, may result in the imposition of trade restrictions with China or Taiwan. While we have limited sales in Europe and Taiwan, and procurement from these regions, unrest in these areas may result in a decrease in sales of our products, or an increase in costs of materials and services.

Our dependence on subcontractors and sole source suppliers may prevent us from delivering our products on a timely basis and expose us to intellectual property infringement.

We rely on subcontractors to manufacture many of the components or subassemblies used in our products. Our FOX systems, WaferPak Contactors, DiePak Carriers, WaferPak Aligners, and DiePak Loaders contain several components, including environmental chambers, power supplies, high-density interconnects, wafer contactors, module contactors, signal distribution substrates, and certain ICs that are currently supplied by only one or a limited number of suppliers. Our FOX systems, WaferPak contactors, DiePak carriers, WaferPak Aligners, and DiePak Loaders contain several components, including environmental chambers, power supplies, high-density interconnects, wafer contactors, module contactors, signal distribution substrates, and certain ICs that are currently supplied by only one or a limited number of suppliers. Our reliance on subcontractors and single source suppliers involves a number of significant risks, including the loss of control over the manufacturing process, the potential absence of adequate capacity and reduced control over delivery schedules, manufacturing yields, quality and costs. In the event that any significant subcontractor or single source supplier is unable or unwilling to continue to manufacture subassemblies, components or parts in required volumes, we would have to identify and qualify acceptable replacements. The process of qualifying subcontractors and suppliers could be lengthy, and no assurance can be given that any additional sources would be available to us on a timely basis. Any delay, interruption or termination of a supplier relationship could adversely affect our ability to deliver products, which would harm our operating results.

Our suppliers manufacture components, tooling, and provide engineering services. During this process, our suppliers are allowed access to our intellectual property. While we maintain patents to protect from intellectual property infringement, there can be no assurance that technological information gained in the manufacture of our products will not be used to develop a new product, improve processes or techniques which compete against our products. Litigation may be necessary to enforce or determine the validity and scope of our proprietary rights, and there can be no assurance that our intellectual property rights, if challenged, will be upheld as valid.

Tightening of fiscal monetary policy, and periodic economic and semiconductor industry downturns could negatively affect our business, results of operations and financial condition.

The current economic conditions and uncertainty about future economic conditions, including volatility in the financial markets, national debt, fiscal or monetary concerns, inflation and interest rates, bank failures, and economic recession, make it challenging for us to forecast our operating results, make business decisions, and identify the risks that may affect our business, financial condition and results of operations. The market for semiconductors and semiconductor capital equipment has historically been cyclical, and we expect this trend to continue in the future. If we do not appropriately manage our business operations in response to changing economic and industry conditions, it could have a material and adverse impact on our business performance and financial condition.

Our net sales are affected by the cyclicality of the semiconductor market, which may have a material adverse impact on our business performance and financial condition.

A significant portion of our business depends upon the capital expenditures of semiconductor manufacturers. Capital expenditures by these companies depend upon, among other things, the current and anticipated market demand for semiconductors and the products that utilize them. Typically, semiconductor manufacturers curtail capital expenditures during periods of economic downturn. Conversely, semiconductor manufacturers increase capital expenditures when market demand requires the addition of new or expanded production capabilities. This cyclicality may have a material adverse impact on our business performance and financial condition.

We may be subject to litigation relating to intellectual property infringement which would be time-consuming, expensive and a distraction from our business.

If we do not adequately protect our intellectual property, competitors may be able to use our proprietary information to erode our competitive advantage, which could harm our business and operating results. Litigation may be necessary to enforce or determine the validity and scope of our proprietary rights, and there can be no assurance that our intellectual property rights, if challenged, will be upheld as valid. Such litigation could result in substantial costs and diversion of resources and could have a material adverse effect on our operating results, regardless of the outcome of the litigation. In addition, there can be no assurance that any of the patents issued to us will not be challenged, invalidated or circumvented or that the rights granted thereunder will provide competitive advantages to us.

There are no pending claims against us regarding infringement of any patents or other intellectual property rights of others. However, in the future we may receive communications from third parties asserting intellectual property claims against us. Such claims could include assertions that our products infringe, or may infringe, the proprietary rights of third parties, requests for indemnification against such infringement or suggestions that we may be interested in acquiring a license from such third parties. There can be no assurance that any such claim will not result in litigation, which could involve significant expense to us, and, if we are required or deem it appropriate to obtain a license relating to one or more products or technologies, there can be no assurance that we would be able to do so on commercially reasonable terms, or at all.

While we believe we have complied with all applicable environmental laws, our failure to do so could adversely affect our business as a result of having to pay substantial amounts in damages or fees.

Federal, state and local regulations impose various controls on the use, storage, discharge, handling, emission, generation, manufacture and disposal of toxic and other hazardous substances used in our operations. We believe that our activities conform in all material respects to current environmental and land use regulations applicable to our operations and our current facilities, and that we have obtained environmental permits necessary to conduct our business. Nevertheless, failure to comply with current or future regulations could result in substantial fines, suspension of production, alteration of our manufacturing processes or cessation of operations. Such regulations could require us to acquire expensive remediation equipment or to incur substantial expenses to comply with environmental regulations. Any failure to control the use, disposal or storage of or adequately restrict the discharge of, hazardous or toxic substances could subject us to significant liabilities.

The failure to successfully implement enterprise resource planning and other information systems changes could adversely impact our business and operating results.

We periodically implement new or enhanced enterprise resource planning and related information systems in order to better manage our business operations, align our global organizations and enable future growth. Implementation of new business processes and information systems requires the commitment of significant personnel, training and financial resources, and entails risks to our business operations. If we do not successfully implement enterprise resource planning and related information systems improvements, or if there are delays or difficulties in implementing these systems, we may not realize anticipated productivity improvements or cost efficiencies, and may experience interruptions in service and operational difficulties, which could result in quality issues, reputational harm, lost market and revenue opportunities, and otherwise adversely affect our business, financial condition and results of operations.

Risks Related to Ownership of our Common Stock

Our stock price is volatile.

Historically, our common stock has experienced substantial price volatility. For example, during the two-year period ended May 31, 2024, the price of our common stock has ranged from $6.71 to $54.10. If our future operating results or margins are below the expectations of stock market analysts or our investors, our stock price will likely decline. Factors such as announcements of developments related to our business, fluctuations in our operating results, general conditions in the semiconductor and semiconductor equipment industries as well as the worldwide economy, announcement of technological innovations, new systems or product enhancements by us or our competitors, fluctuations in the level of cooperative development funding, acquisitions, changes in governmental regulations, developments in patents or other intellectual property rights and changes in our relationships with customers and suppliers could cause the price of our common stock to fluctuate substantially. We believe that factors such as announcements of developments related to our business, fluctuations in our operating results, general conditions in the semiconductor and semiconductor equipment industries as well as the worldwide economy, announcement of technological innovations, new systems or product enhancements by us or our competitors, fluctuations in the level of cooperative development funding, acquisitions, changes in governmental regulations, developments in patents or other intellectual property rights and changes in our relationships with customers and suppliers could cause the price of our common stock to fluctuate substantially. In addition, in recent years the stock market in general, and the market for small capitalization and high technology stocks in particular, have experienced extreme price fluctuations which have often been unrelated to the operating performance of the affected companies. Such fluctuations could adversely affect the market price of our common stock.

Increased scrutiny and changing expectations from stakeholders with respect to the Company’s ESG practices may result in additional costs or risks.

Companies across many industries are facing increasing scrutiny related to their ESG practices. Investor advocacy groups, certain institutional investors, investment funds and other influential investors are also increasingly focused on ESG practices and in recent years have placed increasing importance on the non-financial impacts of their investments. If our ESG practices do not meet investor or other industry stakeholder expectations, which continue to evolve, we may incur additional costs and our brand, ability to attract and retain qualified employees and business may be harmed.

Risks Related to our Financial/Legal/Organizational Structure

We depend on our key personnel and our success depends on our ability to attract, retain and motivate talented employees.

Our success depends to a significant extent upon the continued service of Gayn Erickson, our President and Chief Executive Officer, as well as other executive officers and key employees. We do not maintain key person life insurance for our benefit on any of our personnel, and none of our employees are subject to a non-competition agreement with us. The loss of the services of any of our executive officers or a group of key employees could have a material adverse effect on our business, financial condition and operating results. Our future success will depend in significant part upon our ability to attract, retain and motivating highly skilled technical, management, sales and marketing personnel. Our future success will depend in significant part upon our ability to attract and retain highly skilled technical, management, sales and marketing personnel. There are a limited number of personnel with the requisite skills to serve in these positions, and it has become increasingly difficult for us to hire such personnel. Competition for such personnel in the semiconductor equipment industry is intense, and there can be no assurance that we will be successful in attracting, retaining or motivating such personnel. Changes in management could disrupt our operations and adversely affect our operating results.

If we fail to maintain effective internal control over financial reporting in the future, the accuracy and timing of our financial reporting may be adversely affected.

We are required to comply with Section 404 of the Sarbanes-Oxley Act of 2002. The provisions of the act require, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. Preparing our financial statements involves a number of complex processes, many of which are done manually and are dependent upon individual data input or review. These processes include, but are not limited to, calculating revenue, deferred revenue and inventory costs. While we continue to automate our processes and enhance our review and put in place controls to reduce the likelihood for errors, we expect that for the foreseeable future, many of our processes will remain manually intensive and thus subject to human error.

A change in accounting standards or practices or a change in existing taxation rules or practices (or changes in interpretations of such standards, practices or rules) could have a significant effect on our reported results and may affect reporting of transactions completed before the change is effective.

New accounting standards and taxation rules and varying interpretations of accounting pronouncements and taxation rules have occurred and will continue to occur in the future. Changes to (or revised interpretations or applications of) existing accounting standards or tax rules or the questioning of current or past practices may adversely affect our reported financial results or the way we conduct our business. Adoption of new standards may require changes to our processes, accounting systems, and internal controls. Difficulties encountered during adoption could result in internal control deficiencies or delay the reporting of our financial results.

Item 1B. Unresolved Staff Comments

None.

ITEM 1C. Cybersecurity

Cybersecurity Risk Management and Strategy

We have established processes for assessing, identifying, and managing material risk from cybersecurity threats, and have integrated these processes into our overall risk management systems and processes. To prevent, detect and respond to information security threats, we maintain a cyber risk management program that employs Cyber Security Framework (“CSF”) in accordance with the National Institute of Standards and Technology (“NIST”) security framework. CSF is a set of voluntary guidelines that help organizations assess and improve their cybersecurity posture by implementing processes for identifying and mitigating risk, and detecting, responding to and recovering from cyberattacks.

We conduct periodic risk assessments to identify cybersecurity threats, as well as assessments in the event of a material change in our business practices that may affect information systems that are vulnerable to such cybersecurity threats. These risk assessments include identification of reasonably foreseeable internal and external risks, the likelihood and potential damage that could result from such risks, and the sufficiency of existing policies, procedures, systems, and safeguards in place to manage such risks. Following these risk assessments, we re-design, implement, and maintain reasonable safeguards to minimize identified risks; reasonably address any identified gaps in existing safeguards; and regularly monitor the effectiveness of our safeguards.

Our Security Awareness Program includes training that reinforces our information technology risk and security management policies, standards and practices, as well as the expectation that employees comply with these policies. The Security Awareness Program engages personnel through training on how to identify potential cybersecurity risks and protect the Company’s resources and information. This training is mandatory for all employees on a periodic basis, and it is supplemented by Company-wide testing initiatives.

Our processes also address cybersecurity threat risks associated with our use of third-party service providers, including our suppliers or who have access to our systems. In addition, cybersecurity considerations affect the selection and oversight of our third-party service providers. We perform diligence on third parties that have access to our systems, data or facilities that house such systems or data, and continually monitor cybersecurity threat risks identified through such diligence.

We have not identified risks from known cybersecurity threats, including as a result of any prior cybersecurity incidents, that have materially affected us, including our operations, business strategy, results of operations, or financial condition. We face risks from cybersecurity threats that, if realized, are reasonably likely to materially affect us, including our operations, business strategy, results of operations, or financial condition. See “Risk Factors – We are exposed to cybersecurity threats or incidents.”

Cybersecurity Governance

One of the key functions of our Board of Directors is informed oversight of our risk management processes, including risks from cybersecurity threats. Our Board of Directors is responsible for monitoring and assessing strategic risk exposure, and our executive officers are responsible for the day-to-day management of the material risks we face. Our Board of Directors administers its cybersecurity risk oversight function directly as a whole, as well as through the Audit Committee of the Board of Directors (the “Audit Committee”). The Audit Committee has primary responsibility for oversight of information security risks, including fraud, vendor, data protection and privacy, business continuity and resilience, and cybersecurity risks, and provides regular updates to the Board of Directors on such matters. The Audit Committee receives regular reports from our Chief Operating Officer on, among other things, the Company’s cyber risks and threats, the status of projects to strengthen the Company’s information security systems, assessments of the Company’s security program and the emerging threat landscape. Information security risk is a significant oversight focus area for the Audit Committee, as well as the entire Board of Directors. Over the course of fiscal year 2024, the Audit Committee received four separate cybersecurity briefings from our Chief Operating Officer.

Our Chief Operating Officer is primarily responsible for assessing and managing our material risks from cybersecurity threats. Our Chief Operating Officer, who leads a team responsible for enterprise-wide cybersecurity strategy, policy, standards, architecture and processes, has extensive experience and background in information technology, cybersecurity, enterprise strategy, risk management. Additionally, our Chief Operating Officer chairs our Cybersecurity Incident Response Team, which is responsible for prevention, identification, containment, eradication and remediation of cybersecurity incidents.

Recently Filed

Click on a ticker to see risk factors

Ticker *	File Date
EVI	17 hours ago
FARM	17 hours ago
RLGT	17 hours ago
IBEX	17 hours ago
EGAN	18 hours ago
ZS	18 hours ago
AIAD	1 day, 2 hours ago
EPM	1 day, 17 hours ago
LSAK	1 day, 18 hours ago
LYTS	1 day, 18 hours ago
IROQ	1 day, 20 hours ago
INNV	2 days, 17 hours ago
GROW	2 days, 17 hours ago
CTLP	2 days, 17 hours ago
MTRX	2 days, 18 hours ago
DREM	2 days, 18 hours ago
TMGI	2 days, 22 hours ago
BFYW	3 days, 4 hours ago
LTRX	3 days, 17 hours ago
FEAM	3 days, 17 hours ago
CTLT	6 days, 17 hours ago
VYST	6 days, 17 hours ago
GCBC	6 days, 17 hours ago
PANW	6 days, 18 hours ago
TWIN	6 days, 18 hours ago
CBKM	6 days, 20 hours ago
FLWS	1 week ago
GDLC	1 week ago
LTCN	1 week ago
BCHG	1 week ago
BRC	1 week ago
STRT	1 week ago
CSCO	1 week ago
BOWL	1 week ago
PDEX	1 week ago
WMPN	1 week ago
WRPT	1 week ago
SASI	1 week, 1 day ago
INTU	1 week, 1 day ago
SGMA	1 week, 2 days ago
PROV	1 week, 6 days ago
GBLX	1 week, 6 days ago
FLXS	1 week, 6 days ago
AGTX	1 week, 6 days ago
APLD	2 weeks ago
OSIS	2 weeks ago
NSSC	2 weeks ago
SKLZ	2 weeks ago
GEG	2 weeks ago
CLSH	2 weeks ago

OTHER DATASETS

House Trading

Dashboard

Corporate Flights

Dashboard

App Ratings

Dashboard